Dropper Post PICKUP - 50x50 bracket and up to a metre of box section in BLACK or WHITE or DARK GREY or Cream or light grey

Small bracket and Box Post that is normally used to hang a screen from a header in roof which may only drop down a metre or so

For example of you had a carport 3600 wide between posts and you only wanted a screen the top 800mm only!  However the span of slats should stay under 2400mm so you would add a dropper post that lines up with your other posts then make 2 screen panels so that each of your existing posts then run a screen to the centre post.  

This saves adding posts to the ground

The bracket needs to screw into something above so a header or a DIY item you put there.

This is a PICKUP FROM Narangba.  If you need delivery, see alternate listing

Available in these Colours 50mm Box:

1) Black

2) Gloss White

3) Flat Dark grey

4) Merbau

5) Cream

6) Paperbark

7) Light Grey

**No matching bracket in light grey or merbau

When used from the header beam it is use for carport infills where the span is more than the 2400 wide.  Use for infills for carports to stop wind and rain.  Can also be used for balconies when adding screens top down to stop rain.

How to Use as a Dropper Post

Screw the bracket into your header and that position will be determined where that header sits to how you will line up the slats.  Slide the supplied small 50x50 post to it (we supply them up to 1000mmm each). Put the supplied end cap on the post

The PRICE is for 1 bracket and 1 x Plastic cap and up to 1000mm of post

Colours: Black or White or Dark Grey or Cream

See drawing to make sure it suits your spec

The price is based on you also purchasing the slats from us.