Vertical with Horizontal Tops - Fence Gates Sliders - SQM Guide

EXCLUSIVE PANEL COMBO DESIGNED AND INVENTED AS A DIY KIT IN BRISBANE

THIS IS A DIY PRODUCT FOR YOU TO ASSEMBLE & INSTALL

**See Drawings on how this is built**

Using 100mm slats on the top and bottom.  You choose the gaps between the slats at either 10mm or 16mm or 40mm.  You choose how many Horizontal slats you want on top and the balance of your custom height will be the vertical base. The horizontal slats will slide into side channels.  Those side channels will connect to your posts.  Brackets are used on bottom rail & the top is supported by the 30x30mm channels on the side.

How to Get Fast Prices

- SMS me your width and height sizes to 0414237573

- Tell me colour of slats 

- Tell me if you want 10mm or 16mm or 40mm gaps between the slats (the gap you have on the bottom will be the same for the top)

- Advise if you need a fence, gate or Slider

For example a typical 2200 wide x 1600 high fence with 16mm gaps and in Black would be around $720.  That works out at $204 per SQM.

The SLAT COLOURS WE STOCK 

• Merbau Woodgrain
  

• Dark Grey - Flat

• Satin Black

• Red Cedar Woodgrain

• Gloss White

• Gloss Shale Grey
• Gloss Cream
• Paperbark

The TOP and BOTTOM Rail COLOURS WE STOCK

 Gloss White

Satin Black

Merbau

Gloss Cream

Shale Grey

Dark Grey

Paperbark

You can build your fences or screens between Aluminium posts or your own brick piers or other post material like timber or steel. 

We carry 76x76mm or 100x100 Aluminium Posts here.

SUPER EASY DIY

• Strongest slats in Australia with 2 internal ribs for strength
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 8 Slat Colours to choose from: Merbau, Red Cedar, Cream, White, Black, Paperbark, Light Grey & Dark Grey
• 7 Rail Colours are White, Cream, Merbau, Dark and Light Grey, Paperbark or Black
• This is a unique style of fence or gate
• We give you free inserts to either allow 10mm, 16mm, 40mm gap between slats
• Merbau & Red Cedar have the Gloss Woodgrain finish on it
• White, Cream and Light Grey are a gloss finish
• Black and Grey are a matt/satin finish
• 
  

PRICES - Cut to size then you assemble at home

WE ALSO MAKE GATES & SLIDERS

What you should know:

- Payment of $100 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow 3-6mm difference in final sizes

- When we quote you slat gaps 10mm or 16mm, 40mm) this will be the gap between the slats.  The slat and gap may not divide equally into your width so we will advise what that gap is when we give you the installation instructions. Or ask us prior to the order.

BULKY GOODS DELIVERY

- If only buying 1 x gate or 1 x panel then Australia wide wrapping and shipping is =$120.  

- If buying more, then see the flat rate shipping Info below:

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for most of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a home in your state or country town