-500x500.jpg "Slat Vertical Gates Made to Measure - Custom - SQM GUIDE")
Slat Vertical Gates Made to Measure - Custom - SQM GUIDE
- Availability: In Stock
- Product Code: Aluminium Screening
- $230.00
We cut to size your Gate - You assemble and Install
DIY
- SMS me your size to 0414237573
- Tell me what height and width
- Tell me colour of slats - Black, white, light grey, dark grey, cream, red cedar, paperbark or merbau
- Tell me if you want black, white, Dark Grey, Light Grey, Cream, Paperbark or Merbau gate frames
- Tell me if you want 0mm, 10mm or 16mm or 40mm gaps between the slats
For
example a typical 1800mm tall and 2000mm wide gate, with vertical slats with 40mm gaps and supplied in DIY form (which
still needs assembly by you) would cost around $847 or $230 per SQM.
If you want us to
assemble then supply and build is $90 extra (1000m or under) or up to $150 for wider gates.
We do not install at your location and the pickup is from Narangba. (e.g. price above is for 40mm gaps and black slats)
We make CUSTOM TO YOUR SIZES
We can supply to suit either horizontal slats or vertical slats. Please specify or it will be made to suit traditional horizontal.
What you should know:
- Payment of $100 needs to be made for any custom orders of small gates
- We cut Tuesdays and Thursday each week so have orders in before that
- Protective sheets will be left on the material for you to remove.
- Allow 2-5mm difference in final size as all is hand cut
- When we quote you slat gaps (10mm or 16mm or 40mm) this will be the gap between the slats. The gap between the first slat and last slate to the frame will be equal. This is because we do not cut (or rip) slats long ways. So if you want the same gap all the way through your gate then ask us for a height close to your needs that divides equal.
- If you buy DIY the tools you would need to build the gate would be a Tek drill, tape measure and a Square.
Gate outside frame material is available in:
-
Satin Black
-
Gloss White
- Dark grey
- Merbau
- Cream
- Light Grey
- Paperbark
When cut allow a -5 to +5 tolerance for the size you ask. Also you should be leaving clearances to fit your own hinges and locks. Select a hinge that allows you to adjust the gates gaps. Depending on the height of the gate you should be able to adjust the gates square by 5 to 10mm easily. Some hinges need gaps of 10mm to 30mm and some locks sit on the inside of frame and have magnet catches so the clearance could be between 10mm to 15mm.
We sell a hinge that sits inside the 50x50 channel on the side of the gate.
Further Information on Installation
* You need to have DIY experience
* Price does not come with any posts
* Heavy Duty alloy 76mm x 76mm posts are available from our warehouse at $40lm
* Instructions are provided
* Each install and each home is different. You may need extra hardware or less hardware.
*At least 2 people needed to install
These tough surface finishes are guaranteed for ten years – Our aluminium gates require virtually no maintenance.
A periodic wipe down keeps them looking as good as new – Aluminium gates don’t rot, warp, crack, dry out or soak up water.
They are strong yet light and do not expand and contract like wood – And now you can have your own, low maintenance, long lasting, beautiful aluminium gates without breaking the bank.
Lightweight and robust - Our high quality aluminium gates offer a no maintenance alternative to traditional wood and steel counterparts, aluminium will not be affected by the changing weather conditions
Powder Coated Finish - Offers extra protection that will keep the gates looking like new for years to come.
So you will have NO RUST and the surface stays is POWDER COATED to last a decade
Note
We supply gates only. We do not do measure and quotes or installs. If we assemble the Gates it could be up to 10mm out of square adjustment or size adjustment but can be adjusted and squared using our hinges.
- Frame Material (Black, White, Dark or Light Grey, Cream, Paperbark or Merbau)
- Slat Inserts (Black, White, light and dark Grey, Cream, Paperbark if you want woodgrain Browns add around 15%)
- Screws and Spacers included
- Horizontal slats
- 16mm gaps but we can also do 10mm or 40mm gaps with price adjustment
Gate Heights to allow even spacing between slats and also the gate frame
ANY HEIGHT CAN BE MADE - WE CUSTOM MAKE ALL OUR SLAT GATES AND PROVIDE EITHER FULL MADE OR DIY
BULKY GOODS
DELIVERY
- If only buying 1 x gate
or 1 x panel then Australia wide wrapping and shipping is =$120.
- If buying more, then see
the flat rate shipping Info below:
-$140 flat rate fee to the
Northside of Brisbane
-$200 flat rate fee to the
Southside of Brisbane
-$250 flat rate fee to the
Gold Coast, Ipswich or Sunshine Coast
-$350 flat rate fee to
Sydney or Rockhampton
-$450 flat rate fee to
Melbourne or Townsville
**We use backload trucks
for most of the above and usually do all drops in other country towns we pass
but following that main highway. Sometimes these deliveries will be after
hours
-All
other areas we can quote to a home in your state or country town
