PVC Fence Accessories
GATE FOR POST AND 4 RAIL PANELS
$300.00 PICK UP
1200W
(no locks or hinges)
ABOUT PVC VINYL FENCING
PVC fencing is maintenance free product that allows you to build your own
stylish fences in a fast and economical way using our efficient DIY Flat Pack
system.
PVC fencing won't have the same issues as traditional timber and
it will not rot or split or have any fungal or white ant problems that are
normal in timber fencing.
Best of all it is ZERO PAINTING forever.
PVC fencing is fast install fencing because all the posts are
pre-cut and all the rails just clip in.
The PVC fences exterior finish is Gloss white and UV stabilised for longevity
and it is sure to make your home and property the stand-out on the street.
What is Flat Pack?
We are a DIY Fence COMPANY. We don't come out and do measure and quotes.
We don’t install but we can deliver. You just let us know how many 2342mm
wide panels you need and you can pick up next day or we deliver.
Pedestrian Gates
Most of our PVC fences we offer a matching 1200 wide gate and are $320
each. We do have a limit of 1 gate per 10 panels at this discounted rate.
Posts - 127x127mm
We supply ONE post with each panel, You will then buy extra posts. Now
you need to decide what posts are needed. There are 4 different posts. Each
post has been pre-cut to fit the rails already for the model fence you
purchase. You cannot do a DIY project without a plan so if you are up to this
point and you still have not drawn out your job on paper for YOUR reference then you should
start now!
* A line post is where the fence connects in 1 line. So a straight fence.
* A corner posts is where fence connect at 90 degrees.
* An end posts is where the fence rails goes in on 1 side only.
* A blank post has nothing cut out and you'll do yourself (some skill, tools
& patience needed for this option)
* Any extra posts are $48 each for any style.
HOW TO WORK OUT WHAT YOU NEED? (Please read first it will give you all info)
We don't offer a design service. We are suppliers of lots of
fencing products and our business model is to provide great products fast and at
the factory direct prices to the person or family who does DIY at home. I know
this won't suit everyone and that's OK there are other fence companies out
there but usually can’t compete with our selling rates.
Our set price is for each PVC panel that measures 2342mm wide (Crossbuck model
is 2191mm). This size is centre of one post to centre of next post.
Each panel comes with 1 x post with cap and all the fence material needed as
per the finished image and is flat pack.
Easy
Example on how to work out what you need - Divide your total metres
of your fence in all directions by 2342mm and buy the total number of panels to
the highest panel. For examples if you had a total of 22,200mm (22.2m) front
and side fence then work it out as 22,200mm/2342mm = 9.47 panels so you’re
going to buy 10 panels from PVC Fencing. Note Crossbuck model is 2191mm
So using the 22,200 job it includes 10 posts. SMS us what style of posts
you need for that 10 and extra ones you may need. All posts are the same price.
For example with a gate and a couple of corners you may need 14 posts and
you'll might tell us that 9 are line posts and 2 are end posts and 3 are corner
posts, etc. 10 is included with the panel price so you would be buying 4 extra
posts at the prices listed below.
Post Stiffeners
Our PVC post are plastic so the posts whilst are huge in size and strong, they are
still plastic. So you need to buy aluminium stiffeners that go inside
posts only in the 3 following uses: end of a line or a corner post or a gate
posts. Line posts are usually the only posts not needing
stiffeners. So look at your job and tell us how many corner stiffeners
and end posts stiffeners you need. On small fence runs you may not need
stiffeners if you’re doing several 90 degrees or connecting to existing
structures. Post Stiffeners are $90 each
When
I am ready to Order
- Pay a $100 deposit EFT or CARD
- Give us 24 hours to extract the order from our Narangba Warehouse
- You pick-up and pay balance
- Or we can deliver usually Fridays or Mondays each week
Delivery (flat rates up to 50 panels)
BULKY GOODS
DELIVERY
-$140 flat rate fee to the Northside of Brisbane
-$200 flat rate fee to the Southside of Brisbane
-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast
-$350 flat rate fee to Sydney or Rockhampton
-$450 flat rate fee to Melbourne or Townsville
**We use backload trucks for all of the above and usually do all
drops in other country towns we pass but following that main highway.
Sometimes these deliveries will be after hours
-All other areas we can quote to a freight depot in your state or
country town
SEE ABOUT PVC FENCING PAGE
FOR MUCH MORE INFORMATION
