Polymer VERTICAL T&G Slat Fence - All Custom Sizes in PVC - SQM Guide

Vertical T&G Fences

Custom to your Sizes and supplied DIY!

Slat Configuration:  Vertical

Installed Height: Custom to your needs up to 2204mm high

Length: Custom to your needs <3000mm

T&G Slat Width: 152mm

Gap Between slats: 0mm (full privacy)

Slat thickensss: 22mm

The price listed in roughly a square metre based on a example panel size of 2200w x 1600h which is 3.52sqm =$320 or $91sqm

Our High Quality white polymer Fencing is a practical, fast install Fences, and a stylish alternative to many other fencing products in the market. The classic, chunky white Hamptons feel, ensures the fence will look great in any home.

**Posts: 125mm X 125mm and if needed are sold at $30 per metre if needed.

All our T&G (Tounge & Groove) slats are a Heavy Duty 152mm High x 22mm Thick PVC polymer profile cladding with 2 reinforcing ribs inside.

Our Vertical slat holders called C-Channels are a unique proprietary interlocking extrusion that securely locks in and connects all slats like a brace to your side walls or posts to make the panels super strong.

There is a chunky 140x38mm Pocket Rail on the top and bottom reinforcing the fence to be super strong. These rails connect to your posts or building using brackets.

White screws are provided. 

All our Polymer is rated for outdoors using our unique blended UV formula from one of the largest suppliers in the world.

So it's a sleek and strong finish where a Hamptons full privacy theme is required

The channels & internal slats are all gloss white.

We cut all PVC orders on Wednesdays every week so get your order in before that & we work till all jobs are ready.

Tounge & Groove Fences are full privacy so all the slats slide into to each other creating zero gaps all around.

Remember the screen or fence WIDTH size you give us, it will be cut to that size & we will do the allowances for our channels & rails.

We are a small family run Brisbane company but we fill all our orders each cut day & we never leave anyone hanging. Our prices are transparent & the price algorithm we use is a fair price for all for the fast service provide. I can quote in 5 minutes so don't be afraid to ask for new sizes if needed.

My mobile is 0414237573, feel free to switch to SMS which can be faster.

If you need posts then it's $30 per metre cut to size & are 125x125 strong white PVC. Usually a screens Max width is around 2.6m between posts.

We don't do any home installs or site visits, just DIY. There is 4 notches you'll hand cut with a hacksaw or similar around your brackets and can't be done before you install.

This means it's all cut to your sizes & all the screws & locking channels & any braces are included.

All you need at home is a tek drill, small tools & some time.

SMS John on 0414237573 with width and height of each panel

BULKY GOODS DELIVERY

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for all of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a freight depot in your state or country town