Horizontal LOUVRE FULLY framed Screens & Fences- SQM Guide

LOUVRE SCREENS & FENCES

Horizontal Model - 100mm slats

Normally we build Horizontal screens only with the louvre extrusion on the side then slats in between.  That is good enough for most application of fences and screens. 

However some customers want it fully framed and have more money to spend so this model gives you a 50x50mm frame all the way around. 

To get this model you'd need to advise you want fully framed as we normally default to standard horizontal screens.

How to Get Fast Prices

- SMS me your gate frame size to 0414237573

- Tell me what height and width of the panel

- Tell me colour of slats 

For example a typical Horizontal SCREEN or FENCE 2200 wide x 1200 high louvre gate with 24mm air flow gaps and built Horizontal slats and in Black would be $736.  That works out at $285 per SQM. 

We are DIY only and the pickup is from Narangba, or delivery Australia wide

• The SLAT COLOURS WE STOCK
  

•  Merbau Woodgrain
  

• Dark Grey - Flat

• Satin Black

• Red Cedar Woodgrain

• Gloss White

• Gloss Shale Grey
• Cream
• Paperbark
• 
  

The LOUVRE RAILS & FRAMES WE STOCK

 Gloss White

Satin Black

Dark Grey

You can build your louvre panels between Aluminium posts or your own brick piers or other post material like timber or steel. 

We carry 76x76mm or 100x100 Aluminium Posts here.

All our slats are a Heavy Duty 100mm High x 16mm Thick aluminum profile with 2 reinforcing ribs inside. It's powder coated so will give you at least a decade of no paint or maintenance.

Our Louvre slat holders are a rigid extrusion with laser cut slat holes that hold the slats on a fixed angle. The extrusion is 65mm wide (e.g. the width that goes on the left & right). So when it does attach to the 50x50 frame it will be a little wider at the back of the panel.

When slats are inserted it leaves a 10mm gap between slats but the airflow gap is 24mm.

There is a 50x50 box frame around the ENTIRE PANEL so it is very STRONG.  If wider than 1400w we will add a centre louvre track brace.

So it's a sleek and strong finish where all slats slide into its housing.  The screws are external so when you fit, decide which side will see them.

The slat holders and box channel frame only come in BLACK, DARK GREY & WHITE but the internal slats can be satin black or gloss white or gloss light grey, gloss cream or a flat dark grey. Our 3 Woodgrain slat colours add around 17%.

We cut orders on Tuesdays & Thursdays so get your order in before that & we work till all jobs are out.

Your height won't normally divide equally so there are fixed widths you need to work with.  E.g. 1600mm high is fixed but you can go up or down in lots of 106.5mm to suit your job.  If you have a specific space to fill then we will extend the frame to meet your needs, then there will be a gap equally on the top and bottom between the final slat and the inside of the frame.

Remember the HEIGHT size you give us, the louvre screen will be cut to that size & we will do the allowances for the frame supplied around it. 

We are a small family run Brisbane company but we fill all our orders each cut day and we never leave anyone hanging. Our prices are transparent and the price algorithm we use is a fair price for all for the fast service provide. I can quote in 5 minutes so don't be afraid to ask for new sizes if needed.

My direct mobile is 0414237573 so feel free to switch to SMS which can be faster.

If you need posts then it's $40 per metre cut to size. Posts are in Black or White, Dark Grey or Merbau alloy. All 76x76mm strong aluminum posts that are matching colours.

We don't do any home Installing or site visits at all. We are just DIY.

This means it's all cut to your sizes & all the screws included and you'll collect flat pack.

All you need at home is a Tek drill and a bit of time.

SUPER EASY DIY

• Strongest slats in Australia with 2 internal ribs for strength
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 8 Slat Colours to choose from: Merbau, Red Cedar, Cream, White, Black, Paperbark, Light Grey & Dark Grey
• The frame Colours can only be White, Dark Grey or Black
• This style is a Vertical configuration
• The air flow gap is 24mm
• Merbau & Red Cedar have the Gloss Woodgrain finish on it
• White, Cream and Light Grey are a gloss finish
• Black and Grey are a matt/satin finish

SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock

• Most people will build the louvre screens as panels on the ground before installing. 
• Build the 50x50 box frame with the internal angles
• Connect the side rails with a slat by sliding it inside the laser cut holes.  Remove the plastic from slats only for the section that will be inserted
• Insert first slat, get it level & Tec Screw it from the rear, then connect to other side channel and do a measure (screws are free)
• We have allowed a clearance of 4mm overall for the slat.
• Insert next slat, etc. letting the other end hang while lying it down
• Once done, gently manipulate the other side channel into all the slats (this can be fiddly), then TEC if needed but most won't.
• Insert panel into your space and screw in from behind to keep the screws as invisible as possible

PRICES - Cut to size then you assemble at home

• Posts in Black are $40/lm cut to suit including the post cap
• See the widths that you need to use to make sure slats finish on a full slat.  Heights whatever you like but widths to match below

.

WE ALSO MAKE STANDARD FLAT SLAT SCREENS AT AROUND $70 PER SQM CHEAPER

What you should know to place an order:

- Payment of $100 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow 3-6mm difference in final sizes

- To make the height even with the slats side channels a table below gives you more details,  If you don't work to these heights then there will be a gap and holes appearing in channels.

BULKY GOODS DELIVERY

- If only buying 1 x gate or 1 x panel then Australia wide wrapping and shipping is =$120.  

- If buying more, then see the flat rate shipping Info below:

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for most of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a home in your state or country town