980mm x 50mm Balustrade - Custom Cut - 5 x colours

Chunky and solid high-end Balustrade

White or Black or Dark & Light Greys or Cream, Paperbark or Merbau Colour - Heavy Duty Series

Made to measure custom sizes then you DIY

We use white, dark or light grey, black, cream, paperbark or Merbau slats connected to channels with a 10mm, 16mm, 40mm or 80mm gap between the 100mm vertical Slats.

We can also offer 65mm or 38mm slats if needing white, black or Dark Grey (aka Monument), but more expensive.

The listed price is an estimate of 100mm vertical fencing in Gloss white per Square Metre with an 80mm x 50mm top and bottom Rail & 100mm slats with an 80mm gap between slats. We supply cut to size then you assemble and install.

Posts are extra if needed and available in 8 colours in 76x76mm @ $40 per metre and heavy duty post bases at $35 each

• Custom fences in vertical slats around $235 per sqm, cut to size but DIY. This prices is based kn an EXAMPLE panel size of 2000mm wide x 950mm high =$446 per panel or $235 per square metre.
• These custom panels uses a Top and Bottom Rail made from 80 x 50mm (it is a combination of an 50 and 30mm channels put together.
• All the screws that lock in the slats are screwed behind a concealed proprietary channel that looks sleek and a beautiful finish.
• There will always be variable gaps between the first and last slat as most times the width you have wont divide equally between the slats and the set gaps.
• Brackets only come in Black or White or Dark Grey

To order and give you the least amount of grief is to order in 2 stages.  As we cut twice a week every week including holidays your first step is to get your posts in. 

So SMS what lengths and how many posts you need

Then pick them up and assemble and install.  Once installed SMS each panel between posts width and height.

The height you give is the aluminium panel so you should allow your own gap underneath.